RAM 1.6 Manual do Utilizador descarregar pdf (Página 10)

Element Engineering, LLC

15. Use the small flat head to remove the plastic push lock fasteners from the top of the snorkel,

then you can remove everything. Then remove the blow off valve hose from the valve.

16. Now it’s time for your new intake! Start by installing the reducer coupler on the turbo inlet pipe

and the T-Bolt clamps. You can refer to the shipping BOM (bill of material) drawing included

with your kit for reference. FULLY TIGHTEN THE SMALLER CLAMP BUT LEAVE THE LARGER

CLAMP LOOSE.

1 2 ... 5 6 7 8 9 10 11 12 13

Sem comentários

RAM 1.6 Manual do Utilizador Página 10