RAM 2000 Manual do Utilizador descarregar pdf (Página 2)

RAM DA-2000 SERIES - MULTI-PURPOSE SURVEY METER

The RAM DA-2000 series was developed to solve the problem of rapid instrument obsolescence. The

ﬂexibility and modularity of the RAM DA makes it possible to maintain the highest standards of safety, by

using different types of detectors for different applications.

Applications:

Nuclear Power Plants, nuclear and medical research centers, H.P. departments, radiology clinics,

radiation and environmental protection authorities.

Features:

Communication to PC Calendar/Clock, Non-volatile memory.

Two output relay contacts for threshold and failure alarm.

RMV (Rotem Meter View) compatible.

Different types of detectors can be connected.

Automatic detector identiﬁcation and selection of readout units.

Freeze mode to record the highest dose rate.

Manually set alarm threshold.

Low battery & Overﬂow alarm.

Ability to display several units of measurement (cps, cpm, uSv/h, mR/h, counts…).

RAM DA-2000 / RAM DA-3 2000

MAIN DETECTORS FOR RAM DA 2000

GM-40 Series (GM-40, GM-41, GM-42)

For Gamma Radiation over a

very wide range.

Based on different types of

energy compensated GM tubes.

Extended hook-up cable of up

to 100 meters can be used.

GM-10 Detector

Efﬁcient surface monitoring

of alpha, beta and gamma

radiation contamination,

based on 1¾” Pancake GM

tube.

Sensitivity (

137

Cs):

~350 cpm/µSv/h

(3500 cpm/mR/h)

Measuring Range:

0 to 42,000 cps

PA-100 Detector

Surface monitoring for Alpha

contamination.

Based on Ionization chamber.

Very easy to maintain.

100 cm

(15.5 sq. in.)

IC-10 Detector

Wide range gamma, x-ray and

beta radiation measurement.

Based on 0.5 liter atmospheric

ionization chamber.

Uses special features and

advanced technology.

Gamma scintillation probe

for improved x-ray and low

energy gamma radiation

detection,based on thin Nal 2”

diameter scintillator

(2” dia. X 0.04” thickness).

S.C.A. can be set within the

energy range, optimized for

125

detection and/or other isotopes.

Scintillation probe for high

energy gamma radiation

detection.

Nal 2” x 2” diameter scintillator.

Single channel analyzer (SCA)

– optional.

MULTI-RANGED “SMART” SURVEY METERS

RAM ION Digilog

RAM ION with wireless communication

Features:

Built in wireless transmitter

(900 MHz or 2.4 GHz spread spectrum).

Data Logging capability.

User selectable transmitting intervals.

Compatible to most data collecting

software platforms.

TelePole: A GM meter on an extendible pole

The TelePole is a microprocessor based telescopic rate meter

Features:

Energy compensated GM tubes.

Rugged and lightweight.

Data Logging capability.

“DigiLog” – combined digital and analog display.

“Smoothed” display for minimum readout ﬂuctuations.

IRP-51-H*(10) version available

Manual or Computerized calibration system.

RS-232 Communication Port.

Optional built in wireless transmitter (900 MHz or 2.4 GHz spread spectrum).

Length: From 107 cm up to 337 cm (from 3.5ft up to 11ft.).

Applications:

Supports ALARA principles by allowing operators to obtain readings as much as

eleven feet away from high radiation ﬁelds.

Routine survey instrument with storage and downloading of data to SMARTS.

Readings of hard to reach areas (e.g. vehicle surveys, elevated piping, etc.).

PM-10 Detector

PM-11 Detector

Features:

Ion chamber (500cc) survey meter

Auto ranging Digital and Analog display, combines fast response and readout stability.

Data Logging capability.

Large size character digits.

Built in memory.

Metal front panel.

User adjustable threshold alarm.

Manual or computerized calibration software.

Allows for storage of data points and on-line diagnostics.

IRP-51-H*(10) version available

Applications:

Replaces traditional ion chambers for all outage and routine requirements.

Real-time beta and gamma area monitoring with the TeleMap system.

Optional - built in bar-code laser scanner.

RS-232 serial port for downloading of data to Smarts program.

ALARA hot spot tracking.

Ideal for logging of bar-code location identiﬁcation and plant survey data, which is

then transferred to SMARTS.

RAM DA-3 2000 Measuring Range: 0.5 µSv/h to 1 Sv/h (50 µR/h to 100 R/h)

RAM DA-2000 series: Without internal detector

RAM DA-3 2000 series: With wide range internal detector

Wide Range Monitoring : 1 µSv/h to 500 mSv/h (0.1 mR/h to 50 R/h)

Wide Range: 0.5 µSv/h to 10 Sv/h (0.05 mR/h to 1,000 R/h)

High Range: 50 µSv/h to 10 Sv/h (5 mR/h to 1,000 R/h)

Optional Detector (in the meter): 0.5 µSv/h to 10 mSv/h (0.05 mR/h to 1 R/h)

TeleMap Online Monitoring System

The TeleMap Software package continuously monitors radiation levels.

The system collects data on line from detectors in the ﬁeld and displays them

on area maps.

Data can be collected using either RS-485 communications protocol and/or

wireless network.

A modular system, used in nuclear power plants, to collect radiation

levels on-line for instant appraisal.

Measuring Range:

1.0 µSv/h to 250 mSv/h

(0.1 mR/h to 25 R/h)

Surface Sensitivity:

530 cpm per Bq/cm

Measuring Range:

0 to 50,000 cps

Surface Sensitivity (in contact):

131

I: 320 cpm/Bq/cm

99m

Tc: 315 cpm/Bq/cm

Measuring range: 0 to 50,000 cps

Energy range: 10 to 80 keV

125

I surface sensitivity: 440 cpm/Bqcm

Measuring range: 0 to 50,000 cps

Measuring Range:

GM-40: 250 µSv/h to 10 Sv/h

(25 mR/h to 1000 R/h)

GM-41: 50 µSv/h to 1 Sv/h

(5 mR/h to 100 R/h)

GM-42: 0.5 µSv/h to 10 mSv/h

(50 µR/h to 1 R/h)

Two Models: Wide Range and High Range

MEDISMARTS: A UNIQUE ON-LINE RADIATION MONITORING SYSTEM

The MediSmarts system is designed to measure and collect radiation data automatically and continuously

from cyclotron facilities, radiochemistry laboratories,treatment rooms and PET Centers. Radiation is

monitored by a variety of detectors and results are transferred through a series of monitoring channels

to a central computer located in the control room.

PET Monitoring and Nuclear Medical Departments

Our Area Radiation Monitoring is based on ﬁeld proven, highly

reliable radiation detectors, Data Processing Units and unique

Computer Software. The system provides real time on line radiation

levels. The data is used for both radiation safety and improving the

site operation.

The Basic Monitoring

Channel consists of:

Data Processing Unit (DPU)

Detector

Connection Box

Cables

Some Monitoring Channels:

Optional Local

Alarm Unit

Optional Remote

Display Unit

GM-41 Area Monitoring Channel

Used in the Cyclotron vault and in the Hot Cells. Can be set to report activity and is

useful to measure the activity before the material is moved out of the Hot cell into the

Dose Calibrator. (dose and dose rate)

GM-42 Area Monitoring Channel

Used in the Radiochemistry Lab, Control Room, Q.A. Dept, Radiopharmacy and other

rooms to measure general radiation (dose and dose rate).

PM-11 Stack Monitoring Channel

High Sensitivity detector used in the Exhaust Stack to measure radioisotope releases,

down to the 10-

μCi/cc regulatory requirements. Combined with online readings from

the ﬂow meter, provides full reporting on released concentration and amounts.

Features:

Stack Monitoring with quantitative activity release measurement.

Area Monitoring.

Production Monitoring.

Comprehensive radiation analysis software.

Site Safety Control.

Automatic Activity Release Report.

Automatic calculation of the total activity for selected period of time.

Measuring Range: 1 μSv/h to 1 Sv/h (0.1 mR/h to 100 R/h)

Measuring Range: 0.1 μSv/h to 10 mSv/h (0.01 mR/h to 1 R/h)

The following detectors, including underwater installed,

can be used to collect the data:

RAM ION, TelePole, DRM-1, DRM-1D, RAM R-200, AMP-50,

AMP-100 and AMP-200.

IRP-51-H*(10) version available

Features:

Energy compensated GM tube.

Data Logging capability.

Different types of detectors can be connected.

Automatic detector identiﬁcation and selection of readout units.

Ability to display several units of measurement (cps, cpm, µSv/h, mR/h, counts…).

Applications:

Nuclear Power Plants, nuclear and medical research centers, H.P. departments,

radiology clinics, radiation and environmental protection authorities.

RAM DA-2000 / RAM DA-3 2000

Measuring Range: 0.5 µSv/h to 1 Sv/h (50 µR/h to 100 R/h)

Measuring range: 0 to 50,000 cps

1 2 3

Comentários a estes Manuais

Sem comentários

RAM 2000 Manual do Utilizador Página 2

Comentários a estes Manuais

Manuais e produtos relacionados com Amplificadores áudio RAM 2000