RAM 4000 Manual de Instruções descarregar pdf (Página 6)

(I)

(1) Remove packaging materials.

IMPORTANT: Do not remove any permanent instructions or the

data label on your vending machine.

Remove tape, fiberboard edge protectors and corrugated front

protector from your machine before using.

Do not use sharp instruments, rubbing alcohol, flammable fluids, o r

abrasive cleaners to remove tape or glue. These products can d a m a g e

the surface of your vending machine.

(2) Cleaning before use.

I M P O R T A N T: A f t e r y o u r e m o v e a l l o f t h e p a c k a g i n g

materials, clean the inside of your vending machine before using it.

(II)

(1) LOCATION:

?The machine should be installed in shady, cool and dry location

indoors, try to avoid direct sunlight for extended durations of time.

?Avoid installing your machine near water. Make sure there is

e n o u g h r o o m t o o p e n t h e o u t s i d e d o o r . T h e d i s t a n c e

between the back of the machine and wall should larger than 12 in. to

ensure better air flow into the compressor.

INDOOR USE ONLY.

(2) HORIZONTAL POSITION

The vending machine should be installed on leveled and firm ground to

make sure the machine is in horizontal position (Refer to the following

picture), if not, there maybe some problems such as the door cannot be

opened or closed, after time, such a condition may cause distortion of the

body or cause damages to the inner structure. Please adjust the foot from

the front to the back and from the left to the right (Picture I).

Unpacking

Installation Requirements

I The Installation of Your New Vending Machine

1 2 3 4 5 6 7 8 9 10 11 ... 49 50

Sem comentários

RAM 4000 Manual de Instruções Página 6