RAM 3000 Manual do Utilizador descarregar pdf (Página 10)

MANUAL - SPRAY GUN CLEANERS - UG1000-3000 SERIES REVISION 2007-11

SYMPTOM REASON CORRECTIVE ACTION

CLEANING PROBLEMS

GUNS NOT CLEAN,

PUMP WORKING,

SOLVENT FLOW

NORMAL

• Trigger not locked in

open position

• Spray gun is not

properly installed

onto nozzle

• Incompatible solvent

• Low pressure in air

supply

• Plugged jets

After Each Step Below, Turn Timer. If

guns are not clean, carry out next step.

• Use Trigger Lock Spring

• Re-install with proper adapter

• Replace incompatible solvent with sol-

vent formulated for type of paint used

and for Automatic Spray Gun Cleaners.

• Increase air pressure to a minimum of

85 PSI

• Remove and clean by blowing air

through the jets. If not successful,

replace.

GUNS NOT CLEAN,

WASH SOLVENT IS

MILKY WHITE

• Wash solvent is con-

taminated with water

• Replace or recycle wash solvent

TROUBLESHOOTING CHART

1 2 ... 5 6 7 8 9 10 11 12 13 14

Sem comentários

RAM 3000 Manual do Utilizador Página 10