RAM V-6000 Manual do Utilizador descarregar pdf (Página 15)

Modification reserved • 19, rue de Rennes • BP 83221 • F - 35690 ACIGNÉ

The MANUBAL V50 has 2 vertical grab settings (lower setting

and raised setting). This enables 5 round bales to be stacked

using the raised setting. A specific feature of the MANUBAL V50

is that the switch from the lower setting to the raised setting (and

vice versa) may be operated without leaving the cab and without

an additional hydraulic function on the loader.

9.1 Pick up a bale.

9.2 Set the MANUBAL V50 horizontal.

9.3 Move the tractor forward towards the stack that is being

built up in order to operate the pusher, this unlocks the

grab .

9.4 Tilt the MANUBAL V50 forward in order to cause the

grab to slide under the force of gravity, this locks the

grab in the raised setting .

9.5 Crowd the MANUBAL V50 back and set the bale down

on top of the stack .

To return the grab to the lower setting.

9.1 Set the MANUBAL V50 horizontal.

9.2 Operate the pusher against a stacked bale, this unlocks

the grab.

9.3 Crowd the MANUBAL V50 back in order to cause the

grab to slide under the force of gravity, this locks the

grab in the lower setting.

CAUTION: keep all personnel away from the area in which the loader - MANUBAL V50

combination is moving while it is in operation.

9. MANUBAL V50: changing grab setting

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 23 24

Sem comentários

RAM V-6000 Manual do Utilizador Página 15