RAM 6000 Informações Técnicas descarregar pdf (Página 118)

Software Manual 118

Services Tab

• Once the desired information has been selected, click on the NEXT button and the next dialog window will appear:

Event Type: An event is TRUE when:

Data Match: The value of the register is equal to the alarm value.

Data Mismatch: The value of the register is not equal to the alarm value.

Absolute High: The value of the register exceeds the alarm's value.

Absolute Low: The value of the register falls below the alarm's value.

Deviation High: The value of the register exceeds the setpoint by an amount equal to or greater than the alarm's value.

Deviation Low: The value of the register falls below the setpoint by an amount equal to or greater than the alarm's value.

Out of Band: The value of the register moves outside a band, equal in width to twice the alarm's value and centered on the

setpoint.

In Band: The value of the register moves inside a band, equal in width to twice the alarm's value and centered on the set-

point.

Alarm Value (Required): An event is TRUE when:

Data Match: The value of the register is equal to the alarm value.

Data Mismatch: The value of the register is not equal to the alarm value.

Absolute High: The value of the register exceeds the alarm's value.

Absolute Low: The value of the register falls below the alarm's value.

Deviation High: The value of the register exceeds the setpoint by an amount equal to or greater than the alarm's value.

Deviation Low: The value of the register falls below the setpoint by an amount equal to or greater than the alarm's value.

Out of Band: The value of the register moves outside a band, equal in width to twice the alarm's value and centered on the

setpoint.

In Band: The value of the register moves inside a band, equal in width to twice the alarm's value and centered on the set-

point.

Activation Delay (in sec) (Required): Enter the value for the Activation Delay. This is used to indicate how long the

alarm condition must exist (in seconds) before the alarm will become active.

Clear Event/Alarm Condition: Select the desired option to clear an event condition.

Automatic: Allows an event condition to clear to an inactive state when the input meets configured conditions.

1 2 ... 113 114 115 116 117 118 119 120 121 122 123 ... 210 211

Sem comentários

RAM 6000 Informações Técnicas Página 118