RAM 6000 Informações Técnicas descarregar pdf (Página 69)

Software Manual 69

Network Tab

IPSec/NAT

Allow IPSEC: Specify whether to allow ESP data, as well as UDP port 500 to communicate with external devices

through untrusted interfaces. The recommended setting for this field is Yes

Note: This is necessary if you are planning to configure any IPSEC tunnels originating from this device.

Allow NAT-Traversal (Required): Specify whether to allow data on UDP port 4500 on untrusted interface. The recom-

mended setting for this field is Yes

Note: This is necessary if you are planning to run any IPSEC tunnels through our device. This would support a unit

behind a trusted interface to make an IPSEC connection to a host beyond an untrusted interface.

Trusted Interfaces

Identifies the trusted (internal) interface. Traffic from this interface will be permitted outbound. Default is “WAN/eth0”.

• Click on the Add button for Trusted Interfaces and the following dialog window will appear:

Interface: Choose an interface from the drop-down list provided. You may add as many interfaces as exist on the

device. Each selection must be unique.

Trusted interfaces will not block traffic to/from devices connected to that interface. Filter Rules are the only rules that

will control traffic on these interfaces.

• Click on the Finish button to populate the Trusted Interface screen.

1 2 ... 64 65 66 67 68 69 70 71 72 73 74 ... 210 211

Sem comentários

RAM 6000 Informações Técnicas Página 69