RAM 6000 Informações Técnicas descarregar pdf (Página 125)

Software Manual 125

Services Tab

remote peer’s IP). If set to a specific IP, then packets will be sent to this IP only. The recommended setting for this field is

“0.0.0.0” to allow any IP to send packets to the peer import number. You also have the option to set a second, third,

fourth and fifth address in respective fields further below on the dialog window.

Peer IP Port (Required): Enter the peer Port number into the field. This is required for UDP communication. Consult your

network administrator for UDP applicaton destination port number. You also have the option to set a second, third,

fourth and fifth address in respective fields further below on the dialog window. You also have the option to set a second,

third, fourth and fifth port in respective fields further below on the dialog window.

Client IP Port (Required): Enter the client IP port number into this field. This is required if the peer IP Address

is set to a specific IP, then packets will be sent to specific IP at this client IP port number only. Consult your net-

work administrator for UDP application destination port number. Set to 0 if the Peer IP is set to “0.0.0.0”. You

also have the option to set a second, third, fourth and fifth port in respective fields further below on the dia-

log window.

Second/Third/Fourth/Fifth Peer IP Address: In the respective fields, enter the second, third, fourth or fifth peer IP

Address. This is the second, third, fourth or fifth broadcast destination IP address for UDP communication. The recom-

mended setting for this field is <0.0.0.0> if the additional peer IP address option is not used.

Second/Third/Fourth/Fifth Peer IP Port: Enter the second, third, fourth or fifth port number in the respective fields.

Second/Third/Fourth/Fifth Client IP Port: Enter the second, third, fourth or fifth client IP port number into the respec-

tive fields. This is Required if the second, third, fourth or fifth is set to a specific IP, then packets will be sent to specific IP

at this client IP port number only.

TCP Client Broadcaster: If this option is selected, the device will support 10 TCP Client broadcast socket using IP Destination

configuration for connectivity.

Configure IP Destinations:

• Click on ADD button to define the required IP Destination Settings. The following dialog window will appear:

1 2 ... 120 121 122 123 124 125 126 127 128 129 130 ... 210 211

Sem comentários

RAM 6000 Informações Técnicas Página 125