RAM 6000 Informações Técnicas descarregar pdf (Página 96)

Software Manual 96

Services Tab

• Click on the Add button to assign an IP Address to a device based on a MAC address, so that device obtains the

same IP each time it requests a new IP from the DHCP server. The following window will appear:

Enter Client MAC Address (Required): This is the field where you enter the Client’s computer or device MAC (Media

Access Control) address.

The MAC address is a unique number assigned by the manufacturer to any Ethernet networking device, such as a net-

work adapter, that allows the network to identify it at the hardware level. For all practical purposes, this number is

usually permanent. Unlike IP addresses, which can change every time a computer logs onto the network, the MAC

address of a device stays the same, making it a valuable hardware identifier for the network.

When entering the MAC address information, type the 12-digit MAC address in the following format: xx:xx:xx:xx:xx:xx

including the colons.

Enter Client IP Address (Required): Enter the IP address for which you wish to assign to a client’s computer or device

MAC address.

An address valid for the subnet for which the interface is configured. Care should be used to ensure that there is no

conflict with any pre-existing devices on that subnet which may have been already configured to sue statically

assigned IP addresses.

This address should have been provided by your Network Administrator.

• Click on the Finish button. You will return to the DHCP Server Settings dialog window and the entered data will be

visible on the table at the bottom of the window.

• To delete an address, select it in the table and click on the Delete button. To edit an existing rule, select it in the

table and click on the Edit button.

• Click on the “Save” button for changes to be saved without activating the interface until you reboot the unit, the

“Apply” button will save your settings and apply them immediately. To revert to the previous defaults, click on the

“Revert” button.

1 2 ... 91 92 93 94 95 96 97 98 99 100 101 ... 210 211

Sem comentários

RAM 6000 Informações Técnicas Página 96